Scrap Car Dismantling Line

The system adopts the chain plate transmission structure, no waste discharge, adopts the combined type of chain and chain plate, and the power is driven by the reducer. The pre-dismantled old car support is welded on the chain plate and rotates with the chain plate. The installation form is underground, which requires the customer to make the foundation. The depth of the foundation is about 1 meter and the length is about 65 meters. The power of the transmission system is controlled by automation, and the distance between the dismantling station and the dismantling station can be controlled. Compared with the earth rail type manual push and pull, manpower should be saved and the position between the stations should be accurate.

The assembly line disassembly can clearly and accurately reflect the unreasonable production and careless work of each station, and promote the disassembly work of each station to echo and promote each other. Position exchange training can be carried out for operators at each station, which can improve the disassembly skills of operators in the actual disassembly production arrangement and balance the differences caused by the difficulty and labor intensity of disassembly at stations. According to the state of the abandoned automobile and the damage degree of the parts, according to the principle of resource utilization, the dismantling methods can be divided into non-destructive dismantling, quasi-destructive dismantling and destructive dismantling. Avoid the situation that the value of parts is reduced or lost due to improper disassembly, and the disassembled parts can be carefully classified, to a large extent to realize the value of scrapped vehicles, improve the recovery rate.