Industrial Metal Shredder Maintenance Precautions

1. If the rivet head of the impeller is in serious condition, the impeller body and the hub can be welded by electric welding to restore the damaged rivet head to its original normal state.

2. The Industrial Metal Shredder is easy to produce fatigue cracks in the rivet holes. It can be welded and repaired by using the unused welding rods. The remaining welding rods are as long as the remaining welding rods after the welding. The weight of the weld repair is equal. If there is no crack at the symmetrical rivet hole, the electrode should be welded here to offset the newly added welding weight at the symmetry rivet hole crack. According to this method of symmetrical compensation, welding can repair cracks.

4. The new Scrap Metal Crusher solves the shortcomings of the old metal crusher blade. It uses a specially designed spindle and a cutter head. The cutter head is very durable and does not need to be replaced. It only needs to be filled on the cutter head.

5. In order to be able to separate the iron particles and aluminum particles in the metal material, the conveying device of the new metal crusher is configured to combine the transportation and the magnetic separation into one, which is a discharge conveying device, and the metal material after the crushing can be used to separate the metal. Aluminum iron in the middle.