Precautions During Operation Of China Metal Shredder

1. The fixed operation of the China Metal Shredder should be fixed on the cement foundation. If the work location is changed frequently, the pulverizer and the motor are to be mounted on a base made of angle iron. If the pulverizer is powered by a diesel engine, the power of the two should be matched, that is, the power of the diesel engine is slightly larger than the power of the pulverizer, and the pulley grooves of the two are consistent. The outer end faces of the pulleys should be on the same plane.

2. Before starting the machine, it is necessary to check whether the connecting bolts of each part of the unit are tight, whether the tightness of the transmission belt is appropriate, and whether the power cord is good. Is the motor shaft and the shredder shaft parallel?

3. Check if the hammer is good, whether the hole diameter of the sieve is suitable, and whether it is damaged. Drag the belt by hand to check whether the spindle rotation is flexible, with or without card, bump and friction.

4. After starting the China Scrap Shredder Machine, first make the equipment idle for 2-3 minutes, check if the rotor is turning correctly and the sound is normal. It only works when the rotation is stable at the rated speed.

5, at work should pay attention to the operation of the pulverizer at all times, the feeding should be even, to prevent blocking the car, do not overload work for a long time. If vibration, noise, high temperature of the bearing and the body, and external spraying are found, stop the test immediately and continue working after troubleshooting.